Nikon 9350 Manual do Utilizador descarregar pdf (Página 31)

2. There is a silver alignment pin on the inside of the BBA-

C. Align this pin with the hole in the CIU and thread the

BBA-C to the FLA-C.

Silver Alignment Pin Hole in CIU

3. Attach the assembly to your c-mount camera.

4. Attach an objective lens to the front of the assembly.

5. Power the unit through the cable provided with 3 to 15

volts DC. The wire with the white stripe is positive.

6. Set the focus on the objective lens to a subject 15 feet (5

meters) away. While looking at a monitor, loosen the

back focus lens locking screw to adjust the white plastic

focus wheel on the BBA-C housing until the best image

is obtained. This operation may need to be repeated to

get the best image. Re-tighten the lens locking screw

after satisfactory focus is obtained

7. Thereafter, only the objective lens needs refocusing to

accommodate objects at different distances.

2-19

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 54 55

Sem comentários

Nikon 9350 Manual do Utilizador Página 31