Nikon WT-4A D4 D3X D3 D800 D700 D300S D300 Manual do Utilizador

Wireless TransmitterEnUser's Manual

viiiTable of ContentsFor Your Safety ...

88Thumbnail Select Mode / Uploading ImagesUsing the WT-4 with a Computer❏ Network StatusThe status of the link between the host and the WT-4 is shown

89Thumbnail Select Mode / Uploading ImagesUsing the WT-4 with a ComputerThe Status DisplayNetwork status can also be viewed in the top level of the wi

90PC Mode / Connecting to the ComputerUsing the WT-4 with a ComputerPC ModeIn PC mode, a camera equipped with a WT-4 can be controlled over a wireless

91PC Mode / Connecting to the ComputerUsing the WT-4 with a Computer4 Select [PC mode] for the [Wireless transmitter] > [Mode] option in the camera

92PC Mode / Connecting to the ComputerUsing the WT-4 with a ComputerA Ad-hoc Networks (Windows Vista)To connect to an ad-hoc network using Windows Vis

93PC Mode / Connecting to the ComputerUsing the WT-4 with a Computer3 Enter the network security key and click [Connect].4 Click [Close].

94PC Mode / Controlling the CameraUsing the WT-4 with a ComputerControlling the Camera1 Complete the steps in “Connecting to the Computer” (pp. 90–93)

95PC Mode / Controlling the CameraUsing the WT-4 with a Computer❏ Network StatusThe status of the link between the host and the WT-4 is shown by the s

96PC Mode / Controlling the CameraUsing the WT-4 with a ComputerThe Status DisplayNetwork status can also be viewed in the top level of the wireless t

97Print Mode / Configuring the PrinterUsing the WT-4 with a ComputerPrint ModeSelect print mode to use the WT-4 to print JPEG images on a printer conn

ixUploading Images to an ftp Server ... 107Creating an ftp Server...

98Print Mode / Configuring the PrinterUsing the WT-4 with a Computer3 Select [Setup wireless printer] and click [Next].

99Print Mode / Configuring the PrinterUsing the WT-4 with a Computer4 Choose a printer and click [Next].• Windows: Select a printer from the pull-down

100Print Mode / Configuring the PrinterUsing the WT-4 with a Computer• Macintosh: Click [Select Printer…].The following dialog will be displayed; choo

101Print Mode / Configuring the PrinterUsing the WT-4 with a Computer5 Select [Finish wizard] and click [Next].Printer setup is now complete.

102Print Mode / Printing PicturesUsing the WT-4 with a ComputerPrinting PicturesBefore connecting the WT-4, select [MTP/PTP] for the [USB] option in t

103Print Mode / Printing PicturesUsing the WT-4 with a Computer4 Select [Print mode] for the [Wireless transmitter] > [Mode] option in the camera s

104Print Mode / Printing PicturesUsing the WT-4 with a Computer8 Print photographs from the [Print] menu as described in the camera manual. To exit th

105Print Mode / Printing PicturesUsing the WT-4 with a ComputerA Ad-hoc Networks (Windows Vista)To connect to an ad-hoc network using Windows Vista, t

106Print Mode / Printing PicturesUsing the WT-4 with a Computer3 Enter the network security key and click [Connect].4 Click [Close].

Uploading Images to an ftp Server 107Uploading Images to an ftp ServerFollow the steps below to upload pictures to an ftp server over wireless or Ethe

xA Background KnowledgeThis manual assumes basic knowledge of ftp servers and local area networks (LANs). For more information on installing, configu

108Creating an ftp Server / Windows VistaUploading Images to an ftp ServerCreating an ftp ServerThe WT-4 can be used to upload pictures to ftp servers

109Creating an ftp Server / Windows VistaUploading Images to an ftp Server3 Right-click the [Wireless Network Connection] icon and select [Properties]

110Creating an ftp Server / Windows VistaUploading Images to an ftp Server6 Enter an IP address and sub-net mask for the ftp server and click [OK].7 G

111Creating an ftp Server / Windows VistaUploading Images to an ftp Server10Right-click [Default FTP Site] and select [Properties] from the menu that

112Creating an ftp Server / Windows VistaUploading Images to an ftp Server11Select the IP address entered in Step 6 and enter a [TCP port] number. Th

113Creating an ftp Server / Windows VistaUploading Images to an ftp Server12Open the [Home Directory] tab and select [A directory located on this comp

114Creating an ftp Server / Windows XPUploading Images to an ftp ServerWindows XP1 Open the [Control Panel] > [Network and Internet Settings] >

115Creating an ftp Server / Windows XPUploading Images to an ftp Server4 Enter an IP address and sub-net mask for the ftp server and click [OK].5 Go t

116Creating an ftp Server / Windows XPUploading Images to an ftp Server7 Select the IP address entered in Step 4 and enter a [TCP Port] number. The p

117Creating an ftp Server / MacintoshUploading Images to an ftp ServerMacintosh1 Open [System Preferences] and click [Network].2 Select [AirPort] from

Introduction 1IntroductionThank you for your purchase of a WT-4 wireless transmitter for compatible Nikon digital cameras. The WT-4 is for use exclus

118Creating an ftp Server / MacintoshUploading Images to an ftp Server4 Click [Show All] to return to the System Preferences dialog.5 Click [Sharing].

119Copying Network Profiles to the Camera / Ad Hoc NetworksUploading Images to an ftp ServerCopying Network Profiles to the CameraAd Hoc Networks1 Con

120Copying Network Profiles to the Camera / Ad Hoc NetworksUploading Images to an ftp Server4 The dialog shown below will be displayed; click [Next].5

121Copying Network Profiles to the Camera / Ad Hoc NetworksUploading Images to an ftp Server6 Select [Add new profile] and click [Next].7 Enter the fo

122Copying Network Profiles to the Camera / Ad Hoc NetworksUploading Images to an ftp Server8 Select [Manual setup] and click [Next].

123Copying Network Profiles to the Camera / Ad Hoc NetworksUploading Images to an ftp Server9 Enter the following information and click [Next].• Netwo

124Copying Network Profiles to the Camera / Ad Hoc NetworksUploading Images to an ftp Server

125Copying Network Profiles to the Camera / Ad Hoc NetworksUploading Images to an ftp Server10Enter the following information and click [Next].• Obtai

126Copying Network Profiles to the Camera / Ad Hoc NetworksUploading Images to an ftp Server11Enter ftp settings and click [Next].• FTP server: Enter

127Copying Network Profiles to the Camera / Ad Hoc NetworksUploading Images to an ftp Server12Confirm that settings are correct and click [Next].13Sel

2Parts of the WT-4IntroductionParts of the WT-486179104, 5231 Power switch...71, 82, 91, 103, 1412 Antenna connector...

128Copying Network Profiles to the Camera / Ad Hoc NetworksUploading Images to an ftp Server14Turn the camera off and disconnect the USB cable.The net

129Copying Network Profiles to the Camera / Infrastructure NetworksUploading Images to an ftp ServerInfrastructure Networks1 Connect the UC-E4 as show

130Copying Network Profiles to the Camera / Infrastructure NetworksUploading Images to an ftp Server4 The dialog shown below will be displayed; click

131Copying Network Profiles to the Camera / Infrastructure NetworksUploading Images to an ftp Server6 Select [Add new profile] and click [Next].7 Ente

132Copying Network Profiles to the Camera / Infrastructure NetworksUploading Images to an ftp Server8 Select [Manual setup] and click [Next].

133Copying Network Profiles to the Camera / Infrastructure NetworksUploading Images to an ftp ServerA “Automatic Setup”Choose [Automatic setup (recomm

134Copying Network Profiles to the Camera / Infrastructure NetworksUploading Images to an ftp Server9 Enter the following information and click [Next]

135Copying Network Profiles to the Camera / Infrastructure NetworksUploading Images to an ftp Server

136Copying Network Profiles to the Camera / Infrastructure NetworksUploading Images to an ftp Server10Enter the following information and click [Next]

137Copying Network Profiles to the Camera / Infrastructure NetworksUploading Images to an ftp Server11Enter ftp settings and click [Next].• FTP server

3Parts of the WT-4IntroductionD The AntennaAlways use the supplied antenna with the WT-4. Use of other antennas with this transmitter is prohibited by

138Copying Network Profiles to the Camera / Infrastructure NetworksUploading Images to an ftp Server12Confirm that settings are correct and click [Nex

139Copying Network Profiles to the Camera / Infrastructure NetworksUploading Images to an ftp Server14Turn the camera off and disconnect the USB cable

Connecting to the ftp ServerUploading Images to an ftp Server140Connecting to the ftp ServerBefore connecting the WT-4, select [MTP/PTP] for the [USB]

Connecting to the ftp ServerUploading Images to an ftp Server 1414 Select [Transfer mode] for the [Wireless transmitter] > [Mode] option in the cam

Connecting to the ftp ServerUploading Images to an ftp Server1428 Confirm that the selected profile is displayed in green in the top level of the wire

Connecting to the ftp ServerUploading Images to an ftp Server 1432 Select the network name (SSID) for the WT-4 and click [Connect].3 Enter the network

Connecting to the ftp ServerUploading Images to an ftp Server1444 Click [Close].

Uploading ImagesUploading Images to an ftp Server 145Uploading Images1 Press the K button to view pictures on the memory card. Display the first pictu

Uploading ImagesUploading Images to an ftp Server1463 Turn the WT-4 off and wait for the POWER LED (pg. 3) to turn from green to yellow and then go ou

Uploading ImagesUploading Images to an ftp Server 147❏ Transfer StatusDuring playback, the status of images selected for uploaded is shown as follows:

4Supported ModesIntroductionSupported ModesThe WT-4 connects the camera to wireless and Ethernet networks. Photographs on the camera can then be previ

Uploading ImagesUploading Images to an ftp Server148❏ Network StatusThe status of the link between the host and the WT-4 is shown by the status LEDs a

Uploading ImagesUploading Images to an ftp Server 149The Status DisplayNetwork status can also be viewed in the top level of the wireless transmitter

Uploading ImagesUploading Images to an ftp Server150

Menu Guide 151Menu GuideThis section describes the settings available for the [Wireless transmitter] option in the camera setup menu when the WT-4 is

152Mode / Choose ProfileMenu GuideModeChoose from [Transfer mode] (pg. 70), [Thumbnail select mode] (pg. 79), [PC mode] (pg. 90), and [Print mode] (p

153Mode / FTP Registration (for Connection to ftp Servers Only)Menu GuideFTP Registration (for Connection to ftp Servers Only)In transfer mode, ftp pr

Mode / Editing ftp Profiles / WirelessMenu Guide154❏ WirelessThis option contains settings for connection to a wireless network and is only displayed

Mode / Editing ftp Profiles / WirelessMenu Guide 155Channel*1 Choose channel.2 Return to wireless menu (1/2).* Not required if [Infrastructure] is sel

Mode / Editing ftp Profiles / WirelessMenu Guide156Wireless Menu, Page 2/2Encryption1 Highlight encryption method.A EncryptionThe type of encryption a

Mode / Editing ftp Profiles / WirelessMenu Guide 1575 Return to wireless menu (2/2).Key index: In infrastructure networks that use WEP encryption, cho

5Supported ModesIntroductionA FTP ServersServers can be configured using standard ftp services available with supported operating systems, such as IIS

Mode / Editing ftp Profiles / TCP/IPMenu Guide158❏ TCP/IPAdjust TCP/IP settings as described on the following pages. The TCP/IP menu has two pages of

Mode / Editing ftp Profiles / TCP/IPMenu Guide 1594 Exit to TCP/IP menu (1/2). If sub-net mask is required, proceed to Step 5.5 Highlight [Mask].6 En

Mode / Editing ftp Profiles / TCP/IPMenu Guide160TCP/IP Menu, Page 2/2Use gateway: Highlight this option and press the multi selector right to toggle

Mode / Editing ftp Profiles / TCP/IPMenu Guide 161Enable DNS: Highlight this option and press the multi selector right to toggle it on (M) or off. If

Mode / Editing ftp Profiles / FTPMenu Guide162❏ FTPAdjust ftp settings as described on the following pages. The ftp menu has three pages of options;

Mode / Editing ftp Profiles / FTPMenu Guide 1635 Highlight [Folder].6 Display text entry dialog.7 Enter destination folder name (pg. 153).8 Return to

Mode / Editing ftp Profiles / FTPMenu Guide16410Enter edit mode.11Press multi selector left or right to select, up or down to change.12Return to ftp m

Mode / Editing ftp Profiles / FTPMenu Guide 165FTP Menu, Page 2/3Anonymous login: Highlight this option and press the multi selector right to toggle i

Mode / Editing ftp Profiles / FTPMenu Guide1665 Highlight [Password].6 Display text entry dialog.7 Enter password (pg. 153).8 Return to ftp menu (2/3)

Mode / Editing ftp Profiles / FTPMenu Guide 167FTP Menu, Page 3/3Use proxy server: Highlight this option and press the multi selector right to toggle

6WorkflowIntroductionWorkflowWhen using the WT-4 for the first time, follow the steps below to set up the WT-4, install the required software, create

Mode / Editing ftp Profiles / FTPMenu Guide1685 Highlight [Port].6 Enter edit mode.7 Press multi selector left or right to select, up or down to chang

169Transfer Settings (Transfer Mode Only) / Auto SendMenu GuideTransfer Settings (Transfer Mode Only)The following settings are available in transfer

170Transfer Settings (Transfer Mode Only) / Send File AsMenu GuideSend File AsWhen uploading NEF + JPEG images to an ftp server, choose whether to sen

171Print (Print Mode Only) / Deselect All?Menu GuidePrint (Print Mode Only)Choose a printer from the profile list. Once a connection has been estab

172Device Info / Battery InfoMenu GuideDevice InfoThis menu displays the following information about the WT-4. This option is only available when th

173Device Settings / Auto Power OffMenu GuideDevice SettingsFormat the transmitter’s internal memory and choose the delay before the WT-4 turns off au

174Device Settings / Format Transmitter’s MemoryMenu Guide

Appendices 175AppendicesCreating ftp Profiles Using Camera MenusIn transfer mode, the camera menus can be used in place of the WT-4 Setup Utility to c

176Creating ftp Profiles Using Camera MenusAppendices3 Turn on the WT-4.4 Select [Transfer mode] for [Wireless transmitter] > [Mode] (pg. 152).5 A

177Creating ftp Profiles Using Camera MenusAppendicesInterface type: The dialog shown at right will be displayed. Highlight one of the following optio

7Preparing the CameraIntroductionPreparing the CameraBefore using the WT-4, set the camera [USB] option to [MTP/PTP], insert a battery in the WT-4, an

178TroubleshootingAppendicesTroubleshootingProblem Solution Page“POWER” LED does not light.• Turn the WT-4 on.• Confirm that the battery is inserted a

179TroubleshootingAppendicesError displayed stating that no images are available for printing.Only JPEG images can be printed from the camera. Transf

180GlossaryAppendicesGlossaryAd-hoc: Devices in an ad-hoc wireless network communicate directly (“peer to peer”), without a wireless access point.AES

181GlossaryAppendicesIEEE 802.11a/b/g: Wireless LAN standards proposed by the 802 committee, which develops LAN technology standards for the IEEE.IIS

182GlossaryAppendicesPTP-IP (Picture Transfer Protocol over Internet Protocol): A commonly used name for the CIPA DC-005-2005 image transfer protocol

183SpecificationsAppendicesSpecifications❚❚ Wireless Transmitter WT-4/WT-4A/WT-4B/WT-4C/WT-4D/WT-4E* With large antenna at wireless LAN access point.

184SpecificationsAppendicesA Battery LifeThe length of time batteries can be used and the number of shots that can be uploaded before recharging varie

185IndexSymbolsa, b, c 76, 147AAC Adapter 9Ad-hoc 16, 17, 26, 38, 48, 72, 83, 92, 105, 119, 142, 154, 180Antenna 2, 3, 8, 178[Auto power off] 9, 173[A

186IInfrastructure 16, 21, 32, 42, 59, 129, 154, 181IP address 56, 67, 110, 115, 117, 125, 136, 158, 177, 181M[MAC address] 172Memory cards 70, 81, 10

Printed in JapanSB7I01(11)6MWA0111-01No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles

Trademark InformationMacintosh and Mac OS are trademarks of Apple Computer, Inc. Microsoft, Windows, and Windows Vista are registered trademarks of M

8Preparing the WT-4IntroductionPreparing the WT-4Attach the AntennaAttach the supplied antenna to the WT-4 as shown in the diagram.Inserting the Batte

9Preparing the WT-4Introduction3 Close the battery-chamber cover.A Removing the BatteryBeing careful not to drop the battery, open the battery chamber

10Installing SoftwareIntroductionInstalling SoftwareThis section describes how to install the WT-4 Setup Utility and Thumbnail Selector. The WT-4 Setu

11Installing SoftwareIntroduction❏ System RequirementsBefore using the WT-4 or WT-4 Setup Utility CD, confirm that your system meets the following req

12Installing SoftwareIntroduction❏ Windows Vista/Windows XP1 Start the computer and log in to an account with administrator privileges.2 Insert the su

13Installing SoftwareIntroduction5 Select the software to be installed and click [Install]. Follow the on-screen instructions to complete installation

14Installing SoftwareIntroduction❏ Mac OS X1 Start the computer and log in to an account with administrator privileges.2 Insert the supplied installer

15Installing SoftwareIntroduction6 Select the software to be installed and click [Install]. Follow the on-screen instructions to complete installation

16Configuring the NetworkIntroductionConfiguring the NetworkThis section describes how to create ad-hoc and infrastructure networks under Windows Vist

Configuring the Network / Windows Vista / Creating an Ad Hoc NetworkIntroduction 17Windows Vista❏ Creating an Ad Hoc Network1 Click the [Start] orb an

iFor Your SafetyFor Your SafetyTo prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in th

Configuring the Network / Windows Vista / Creating an Ad Hoc NetworkIntroduction183 Select [Set up a wireless ad hoc (computer-to-computer) network] a

Configuring the Network / Windows Vista / Creating an Ad Hoc NetworkIntroduction 195 After entering a network name and choosing security options as de

Configuring the Network / Windows Vista / Creating an Ad Hoc NetworkIntroduction206 Click [Close].Network setup is now complete. Proceed to “Using th

Configuring the Network / Windows Vista / Connecting to an Infrastructure Introduction 21❏ Connecting to an Infrastructure NetworkProcedures for conne

Configuring the Network / Windows Vista / Connecting to an Infrastructure Introduction222 Click [Set up a connection or network].3 Select [Manually co

Configuring the Network / Windows Vista / Connecting to an Infrastructure Introduction 234 After entering a network name and choosing security options

Configuring the Network / Windows Vista / Connecting to an Infrastructure Introduction245 Click [Connect to…].

Configuring the Network / Windows Vista / Connecting to an Infrastructure Introduction 256 Confirm that [Connected] appears next to the network name e

Configuring the Network / Windows XP / Creating an Ad Hoc NetworkIntroduction26Windows XP❏ Creating an Ad Hoc Network1 Click [Start] and select [All P

Configuring the Network / Windows XP / Creating an Ad Hoc NetworkIntroduction 272 Select [Wireless Network Connection] and click [Change settings of t

iiFor Your SafetyObserve proper precautions when handling batteriesBatteries may leak or explode if improperly handled. Observe the following precaut

Configuring the Network / Windows XP / Creating an Ad Hoc NetworkIntroduction283 Click the [Wireless Networks] tab.If a third-party wireless connectio

Configuring the Network / Windows XP / Creating an Ad Hoc NetworkIntroduction 295 Click [Add].

Configuring the Network / Windows XP / Creating an Ad Hoc NetworkIntroduction306 After entering a network name and choosing security options as descri

Configuring the Network / Windows XP / Creating an Ad Hoc NetworkIntroduction 317 Click [OK].Network setup is now complete. Proceed to “Using the WT-

Configuring the Network / Windows XP / Connecting to an Infrastructure Introduction32❏ Connecting to an Infrastructure NetworkProcedures for connectin

Configuring the Network / Windows XP / Connecting to an Infrastructure Introduction 332 Select [Wireless Network Connection] and click [Change setting

Configuring the Network / Windows XP / Connecting to an Infrastructure Introduction343 Click the [Wireless Networks] tab.If a third-party wireless con

Configuring the Network / Windows XP / Connecting to an Infrastructure Introduction 355 Click [Add].

Configuring the Network / Windows XP / Connecting to an Infrastructure Introduction366 After entering a network name and choosing security options to

Configuring the Network / Windows XP / Connecting to an Infrastructure Introduction 377 Click [OK].Network setup is now complete. Proceed to “Using t

iiiNoticesNotices• No part of the manuals included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or tra

Configuring the Network / Macintosh / Creating an Ad Hoc NetworkIntroduction38Macintosh❏ Creating an Ad Hoc Network1 Open [System Preferences] and cli

Configuring the Network / Macintosh / Creating an Ad Hoc NetworkIntroduction 392 Choose [Network Port Configurations] from the [Show] menu.3 Enable [A

Configuring the Network / Macintosh / Creating an Ad Hoc NetworkIntroduction404 Click the AirPort status icon in the menu bar and select [Turn AirPort

Configuring the Network / Macintosh / Creating an Ad Hoc NetworkIntroduction 416 After choosing a network name and channel and adjusting encryption an

Configuring the Network / Macintosh / Connecting to an Infrastructure Introduction42❏ Connecting to an Infrastructure NetworkProcedures for connecting

Configuring the Network / Macintosh / Connecting to an Infrastructure Introduction 432 Choose [Network Port Configurations] from the [Show] menu.3 Ena

Configuring the Network / Macintosh / Connecting to an Infrastructure Introduction444 Choose [AirPort] from the [Show] menu.5 Choose [Preferred networ

Configuring the Network / Macintosh / Connecting to an Infrastructure Introduction 456 Enter the network name and other settings for the wireless acce

46Configuring the NetworkIntroduction7 Click [Apply Now].Network setup is now complete. Proceed to “Using the WT-4 with a Computer” (pg. 47) or “Uplo

Using the WT-4 with a Computer 47Using the WT-4 with a ComputerThe WT-4 can be used in the following modes:Transfer mode: Upload images to a computer.

ivNoticesNotice for Customers in the U.S.A.❏ U.S.A. Federal Communications Commission (FCC) Declaration of ConformityThis device complies with Part 15

48Copying Network Profiles to the Camera / Ad Hoc NetworksUsing the WT-4 with a ComputerCopying Network Profiles to the CameraAd Hoc Networks1 Connect

49Copying Network Profiles to the Camera / Ad Hoc NetworksUsing the WT-4 with a Computer4 The dialog shown below will be displayed; click [Next].5 Sel

50Copying Network Profiles to the Camera / Ad Hoc NetworksUsing the WT-4 with a ComputerA The “Select Action” DialogThe other options in the “Select A

51Copying Network Profiles to the Camera / Ad Hoc NetworksUsing the WT-4 with a Computer6 Select [Add new profile] and click [Next].7 Enter the follow

52Copying Network Profiles to the Camera / Ad Hoc NetworksUsing the WT-4 with a Computer8 Select [Manual setup] and click [Next].

53Copying Network Profiles to the Camera / Ad Hoc NetworksUsing the WT-4 with a ComputerA “Automatic Setup”Choose [Automatic setup (recommended)] when

54Copying Network Profiles to the Camera / Ad Hoc NetworksUsing the WT-4 with a Computer9 Enter the following information and click [Next].• Network n

55Copying Network Profiles to the Camera / Ad Hoc NetworksUsing the WT-4 with a Computer

56Copying Network Profiles to the Camera / Ad Hoc NetworksUsing the WT-4 with a Computer10Select [Obtain IP address automatically] and click [Next].•

57Copying Network Profiles to the Camera / Ad Hoc NetworksUsing the WT-4 with a Computer11Confirm that settings are correct and click [Next].12Select

vNoticesIndoor operationsIn accordance with 47 CFR Part 15.407 (e) U-NII, devices operating in 5.15–5.25 GHz frequency bands are restricted to indoor

58Copying Network Profiles to the Camera / Ad Hoc NetworksUsing the WT-4 with a Computer13Turn the camera off and disconnect the USB cable.The network

59Copying Network Profiles to the Camera / Infrastructure NetworksUsing the WT-4 with a ComputerInfrastructure Networks1 Connect the UC-E4 as shown be

60Copying Network Profiles to the Camera / Infrastructure NetworksUsing the WT-4 with a Computer4 The dialog shown below will be displayed; click [Nex

61Copying Network Profiles to the Camera / Infrastructure NetworksUsing the WT-4 with a ComputerA The “Select Action” DialogThe other options in the “

62Copying Network Profiles to the Camera / Infrastructure NetworksUsing the WT-4 with a Computer6 Select [Add new profile] and click [Next].7 Enter th

63Copying Network Profiles to the Camera / Infrastructure NetworksUsing the WT-4 with a Computer8 Select [Manual setup] and click [Next].

64Copying Network Profiles to the Camera / Infrastructure NetworksUsing the WT-4 with a ComputerA “Automatic Setup”Choose [Automatic setup (recommende

65Copying Network Profiles to the Camera / Infrastructure NetworksUsing the WT-4 with a Computer9 Enter the following information and click [Next].• N

66Copying Network Profiles to the Camera / Infrastructure NetworksUsing the WT-4 with a Computer

67Copying Network Profiles to the Camera / Infrastructure NetworksUsing the WT-4 with a Computer10Select [Obtain IP address automatically] and click [

viNoticesNotices for Customers in CanadaCAUTION : This class B digital apparatus complies with Canadian ICES-003.ATTENTION : Cet appareil numerique de

68Copying Network Profiles to the Camera / Infrastructure NetworksUsing the WT-4 with a Computer11Confirm that settings are correct and click [Next].1

69Copying Network Profiles to the Camera / Infrastructure NetworksUsing the WT-4 with a Computer13Turn the camera off and disconnect the USB cable.The

70Upload pictures to a host computer / Connecting the WT-4Using the WT-4 with a ComputerUpload pictures to a host computerConnecting the WT-4Before co

71Upload pictures to a host computer / Connecting the WT-4Using the WT-4 with a Computer4 Select [Transfer mode] for the [Wireless transmitter] > [

72Upload pictures to a host computer / Connecting the WT-4Using the WT-4 with a ComputerA Ad-hoc Networks (Windows Vista)To connect to an ad-hoc netwo

73Upload pictures to a host computer / Connecting the WT-4Using the WT-4 with a Computer3 Enter the network security key and click [Connect].4 Click [

74Upload pictures to a host computer / Uploading ImagesUsing the WT-4 with a ComputerUploading Images1 Press the K button to view pictures on the memo

75Upload pictures to a host computer / Uploading ImagesUsing the WT-4 with a Computer3 Turn the WT-4 off and wait for the POWER LED (pg. 3) to turn fr

76Upload pictures to a host computer / Uploading ImagesUsing the WT-4 with a Computer❏ Transfer StatusDuring playback, the status of images selected f

77Upload pictures to a host computer / Uploading ImagesUsing the WT-4 with a Computer❏ Network StatusThe status of the link between the host and the W

viiNoticesNotices for Customers in EuropeHereby, Nikon, declares that this Wireless LAN Module (SX-10WAG) is in compliance with the essential requirem

78Upload pictures to a host computer / Uploading ImagesUsing the WT-4 with a ComputerThe Status DisplayNetwork status can also be viewed in the top le

79Thumbnail Select Mode / Uploading ImagesUsing the WT-4 with a ComputerThumbnail Select ModePhotographs taken with [Thumbnail select mode] selected f

80Thumbnail Select Mode / Uploading ImagesUsing the WT-4 with a ComputerThumbnail SelectorThumbnail Selector displays the images stored in the WT-4 as

81Thumbnail Select Mode / Connecting the WT-4Using the WT-4 with a ComputerConnecting the WT-4Before connecting the WT-4, select [MTP/PTP] for the [US

82Thumbnail Select Mode / Connecting the WT-4Using the WT-4 with a Computer4 Select [Thumbnail select mode] for the [Wireless transmitter] > [Mode]

83Thumbnail Select Mode / Connecting the WT-4Using the WT-4 with a ComputerA Ad-hoc Networks (Windows Vista)To connect to an ad-hoc network using Wind

84Thumbnail Select Mode / Connecting the WT-4Using the WT-4 with a Computer3 Enter the network security key and click [Connect].4 Click [Close].

85Thumbnail Select Mode / Uploading ImagesUsing the WT-4 with a ComputerUploading Images1 Connect the WT-4 as described above and select [Thumbnail se

86Thumbnail Select Mode / Uploading ImagesUsing the WT-4 with a Computer3 Right click the camera icon in the [Source] panel and select [Edit camera in

87Thumbnail Select Mode / Uploading ImagesUsing the WT-4 with a Computer6 Click the thumbnail for a photograph that you wish to transfer to the comput