11
Using the Camera
2 Attach the buckle of the base adapter
to the base mount.
• While holding the two protrusions of the buckle
at the same time, slide the buckle until it clicks
into place.
• When removing the buckle, hold the two
protrusions at the same time, and slide them in
the direction opposite of that for attachment.
3 Adjust the camera angle.
• Loosen the plate lock (1), set the camera angle
(2), and then tighten the lock (3).
4 Make sure that there are no foreign substances on the surface to
which the base mount will be attached.
• If there are foreign substances such as dust or water, remove them.
5 Peel off the release liner from the back of the base mount, and
firmly press the base mount so that the entire surface is
attached.
Comentários a estes Manuais