Nikon fe2 Manual do Utilizador descarregar pdf (Página 27)

CONTROLS

DETAIL —‘Continued

Shooting on manual

1) Turn the shutter speed/mode selector dial to any of sixteen

numbered settings or set the f/stop you desire. Faster shutter

speeds will freeze moving subjects while slower ones cause

the action to blur. (Note that you cannot use the shutter

speed/mode selector dial in between the indicated settings.)

2) While looking through the viewfinder, place the subject in the

center of the frame; then pull out the film advance lever,

depress the shutter release button halfway, and check both

the black meter needle and green shutter speed/mode

indicator needle.

3) If both are apart, to get the correct exposure, rotate the

aperture ring and/or the shutter speed dial so that they are

aligned.

4) Depress the shutter release button all the way to take the

picture.

Notes:

1) Because the aperture ring can be set in between the engraved

f-numbers. slight adjustment to obtain the correct exposure should be

made by turning the aperture ring of the lens.

2) At the mechanical settings of M250 and B, the meter does not function

and the meter needle will not move.

3) If you wish to create intentional under- or overexposure, set either

the aperture ring or shutter speed/mode selector dial so that both

needles In the viewfinder are not aligned.

Distributed by WWW.LENSEsfC.NET

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 65 66

Sem comentários

Nikon fe2 Manual do Utilizador Página 27