Nikon fe2 Manual do Utilizador descarregar pdf (Página 52)

ACCESSORIES

Interchangeable Focusing Screens

Three different types of focusing screens are usable with the

Nikon FE2. The Type K2 screen comes with the camera as a

standard accessory. You can also use the optional focusing

screens, Type B2 (matte/Fresnel with focusing spot) or Type

E2 (matte/Fresnel with focusing spot and etched grid lines)

to match your particular requirements.

To change focusing screens,

follow this procedure;

1. Remove the lens from the camera body.

2. Note the focusing screen release latch (D at the top front of

the mirror box casting. Slip the small tip of the special tweez

ers that come with the optional screens under the latch and

pull outward to spring open the holder.

3. Take the screen out of the holder by grasping the small tab

with the tweezers.

4. To mount another screen, carefully position it in place with

the flat side face down and the side with the tab up.

5. Then push the front edge of the holder upward with the

tweezers until it clicks into position.

Notes:

1) To avoid getting smudges or fingerprints on the screen's optical sur

face, do not handle the screen with your fingers.

2) TTL metering of the FE2 is adjusted in accordance with the clear-

matte type finder screen. Therefore, when you change the focusing

screen, please use those screens designated for the FE2.

Distributed by WWW.LENSINC.NET

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 65 66

Sem comentários

Nikon fe2 Manual do Utilizador Página 52